Build Diary - 6th February 2006
|
Following some advice from different members on the owners club forum, I have made some more SVA changes. First off tonight was some nut covers on the front bonnet catches. |
|
I finally finished making my spare wheel cover, I must have made a slight miscalculation though as its rather a tight fit..... Guess I'll be making another then! |
|
Nut covers fitted to the nuts on the bottom of the roll bar. |
|
Exhaust bracket trimmed up with some more nut covers. |
|
Wrapped the front wing stays with amalgamating tape. |
| Jobs still to do: Align Headlamps Cover n/s wing stays with amalgamating tape Make sure all cable ties have no sharp edges Steering self centering Fit rear view mirror Fit battery tray & secure battery Fit cover over +ve battery terminal Tidy under dash wiring Fit steering column shroud Set carbs up Make padded panel to fit under dash to hide all wiring etc. So, nearly there now! |
|
